Hand reamer, adjustable Design: DIN 859, form B, with cylinder shank and square drive. The uneven tooth pitch ensure chatter-free and accurate drilling. The reamer body is slotted, the nominal diameter can be increased by turning the face screw to approx. 1/100. The setting should be made using a ring gauge. Many fits can be set and can compensate for wear. Reamers are set to the nominal size. It should not be dropped due to the increased risk of breakage. Store depressurised. Bright surface, The Ø 4 and 5 mm are straight fluted, spiral fluted from Ø 6 mm (left spiral 7°). Application: Perfectly suited for single production or repair work, only for reaming through holes. Not suitable for machining blind holes due to the conical point geometry and head screw. Also suitable for holes with interrupted cut. Particularly suitable for steel materials up to 500 N/mm² in strength e.g. general construction steels, steel materials up to 900 N/mm² in strength such as machine steels, tempered steels, tool steels, case-hardening steels, casting materials and non-ferrous metals such as aluminium, brass, copper and bronzes. Note: The hand reamer is shock sensitive, so the chips should not be knocked out, but blown out or washed out.
Specifikationer
EAN-kod:
4332163926962
Katalogsida:
1139
Tillv. artnr:
110110180000
Förpackningsstorlek:
1
Förpackningsenhet:
Styck
Vikt:
0.32kg
Nominell Ø d1:
18,0mm
Totallängd I1:
188mm
Skärlängd l2:
68mm
Skaft-Ø d2:
18mm
Fabrikat:
BECK
Stål < 700 N/mm²:
Mkt. lämplig
Stål < 1000 N/mm²:
Mkt. lämplig
Stål < 1400 N/mm²:
Mindre lämplig
Gjutjärn GG/GTS:
Mkt. lämplig
Gjutjärn GGG:
Mkt. lämplig
Alu < 8% Si:
Mkt. lämplig
Alu > 8% Si:
Mkt. lämplig
Koppar Cu-Legering:
Mkt. lämplig
Warning: implode(): Invalid arguments passed in /var/www/vhosts/inlet.se/httpdocs/sitedirect/_files/sys_comp/1/513/sv/sourcecode.php on line 183